Rinforced truss with buckle fastening – bilateral INGUINAL HERNIA ORTHOSIS- biateral

The product is compensated by the National Health Insurance Health System.

The inguinal hernia orthosis is recommended for the support and comfort of the reductible inguinal hernias cases, that are non-operable.

The support cushion is totally adjustable and allows a very precise localization in the lower abdomen region. This diminishes pain drastically and ensures freedom of movement.

Description

  • The hernia bandage cannot replace necessity of surgical procedures.
  • Always to be used according to your doctor’s advice.
  • The orthosis fitting will be made once the patient is laid down on a flat surface and the hernia reduced entirely.
  • It is recommended that a patient should have two same orthosis, for interchanging them, and easier cleaning.
  • Measurements: circumference of the basin

SIZES:

  • 7 circumference 75-83cm
  • 8 circumference 78-86cm
  • 9 circumference 86-94cm
  • 10 circumference 94-102cm
  • 11 circumference 102-110cm
  • 12 circumference 110-120cm

MORE INFORMATIONS

INSTRUCTIONS FOR USE

In order to obtain a greater degree of therapeutic effectiveness in the different pathologies and to prolong the life and utility of the product, it is fundamental that the correct size adequate for each patient or user is chosen (enclosed in the packet is a diagram with all the sizes and the equivalent in centimetres). An excess compression can produce intolerance, therefore we recommend that the compression be regulated to an optimum degree. To fit observe the following aspects: Before proceeding with the fitting of the truss, take into account the following recommendations as the success of the treatment depends on these. Firstly completely reduce the hernia down to the abdominal cavity; this should be carried out in the decubitus supine position (lying face up), as this way the force of gravity helps the intestine to retreat. Following this, place the cushioned ball of containment so that it limits the hernia. If using the truss with a strap, place the belt above the